It’s no secret that constructing a well-developed again entails loads of pulling workouts and sufficient protein to assist your strength- and muscle-building efforts. Whereas there are totally different routes you’ll be able to take to attain that sculpted look, the greatest again exercises revolve round a traditional pull-day staple: the row.
The variety of row variations to select from could really feel overwhelming, however you’ll be able to’t go improper with two of the simplest choices: the chest-supported row and the bent-over row. However what reigns supreme within the battle between a bench-based again builder and a freestanding barbell motion?
We’ll dive deeper into their variations and similarities, break down learn how to carry out every one safely, and focus on the advantages and disadvantages of each so you may get probably the most bang in your buck throughout your subsequent pull-day session.
Desk of Contents
Key Variations
- The bent-over row entails the complete posterior chain and requires important core activation. However, the chest-supported row recruits your upper-back muscle mass whereas principally eradicating your decrease half from the equation.
- The chest-supported row is mostly safer for each rookies and superior lifters because the weight bench gives stability and safety in your backbone. In the meantime, the dearth of help with a bent-over row can restrict the consumer’s capability to correctly have interaction the again since they’re directing effort to stabilize their physique in a bent-over place.
- In contrast to the chest-supported row, the bent-over model instantly carries over to different actions just like the deadlift and good mornings, because it teaches you learn how to hip-hinge appropriately.
[Related: Lat Pulldown vs. Pull-Up: The Battle for a Bigger Back]
Key Similarities
- Each row variations primarily work the latissimus dorsi (lats), making both motion a improbable selection in your again or pull-day exercise.
- Your grip power will probably be put to the check with every train. Rowing will assist you to develop a stronger grip (and forearms), which might repay when performing workouts like cleans, snatches, and shrugs. (If you happen to’re attempting to focus on your again muscle mass and your grip power is a limiting issue, try our record of the greatest lifting straps.)
- The bent-over row and the chest-supported row can assist add thickness and general dimension to your upper- and mid-back, particularly when you range your grip to focus on particular areas.
Muscle groups Labored
Just like the bent-over row, the chest-supported row entails a number of upper-back muscle mass — primarily the latissimus dorsi (lats), trapezius (traps), and rhomboids. Your lats, that are the biggest again muscle mass, are the primary mover throughout any row variation. In the meantime, your traps assist stabilize your scapula, and the rhomboids play an necessary function in shoulder stabilization.

Along with your lats, traps, and rhomboids, your posterior deltoids — the again shoulder muscle mass that connect to your shoulder blades — additionally act as prime movers in the course of the bent-over row and the chest-supported row. Plus, each row variations contain ample biceps activation, as this two-headed muscle assists with flexing your forearm and elbow. As you retract your shoulder blades throughout a row, your biceps assist your arm bend on the prime of the motion. You may also improve the stimulus by utilizing a supinated (palms-up) grip.
Nevertheless, the bent-over row entails a number of muscle teams and joint buildings that the chest-supported model doesn’t. Most notably, this multi-joint motion recruits your hamstrings, glutes, and spinal erectors to stop any rounding as you pull the barbell towards your physique from a hip-hinge place. General, your legs and core should put in an equal quantity of effort as your higher physique to carry out this train safely and successfully.
[Related: What Muscles Do Push-Ups Work? Get More Out of This Timeless Exercise]
When to Do the Chest-Supported Row
Typically, selecting a chest-supported row merely makes extra sense. Whether or not you’re new to lifting, therapeutic from an harm, or trying to goal particular components of your again, listed below are a number of eventualities the place a chest-supported row works greatest:
You’re a Newbie
Simply began power coaching? Relatively than danger getting harm performing a extra technical motion, keep on with the model higher suited to rookies. The chest-supported row teaches you learn how to have interaction your core and excellent your pulling approach from a seated place that retains your backbone secure.
Whereas you’ll have to begin with lighter dumbbells, you’ll be able to shortly improve the load when you stay constant together with your strategy. Plus, the chest-supported row offers you an opportunity to find out how altering variables reminiscent of your grip, the angle of the load bench, and time below stress can have an effect on your outcomes. For instance, an overhand (pronated) grip will result in extra rear delt and upper-back activation since your elbows come out out of your physique. An underhand (supinated) grip retains the elbows nearer, forcing your traps and biceps to step up their recreation.

You’re Working Your Approach Again From Damage
If you happen to’ve been sidelined by a again harm and are able to resume coaching, the chest-supported row is a great selection. Utilizing a bench for assist decreases the strain in your backbone and core, permitting you to give attention to performing the motion utilizing exact approach.
Begin with lighter weights to set your self up for long-term success by rebuilding your power, stamina, and confidence one rep at a time.
You’re Chasing Bodybuilding or Physique Objectives
If you wish to develop a extra outlined, muscular again, the chest-supported row permits you to goal your lats, rhomboids, and traps with out your decrease again and core being a limiting issue. In spite of everything, sustaining a hinged place whereas rowing a heavy load could be very tiring.
From there, you’ll be able to tailor the train to assist your physique targets by going heavier, altering the tempo, altering the incline angle, or experimenting with totally different set and rep ranges. Both approach, the chest-supported row stands out as an apparent selection if you wish to isolate sure muscle mass on again day.
When to Do the Bent-Over Row
There’s a purpose the bent-over row is close to the highest of each greatest again train record: it produces outcomes. From athletes aiming to get extra explosive to individuals who must develop stronger posterior chains to lifters on the lookout for a solution to develop a much bigger again, listed below are conditions the place you can also make the bent-over row the star of the present.
You’re Coaching for Olympic Weightlifting or Powerlifting
All power and energy athletes ought to embody a bent-over row variation of their routine. Olympic weightlifters can profit from this train by utilizing it as a primer for the clear and jerk, which requires explosive motion and a robust higher again.
Plus, powerlifters who need to improve their deadlift PR also can make the most of the bent-over row to assist attain that purpose. Getting comfy with hinging on the hips, mastering learn how to brace your core, and studying learn how to absolutely have interaction your lats and different again muscle mass will solely assist you to carry out even higher when it’s time to step as much as the barbell.

Moreover, bent-over rows may give you a leg up on the squat and the bench press. Creating your traps will create a stronger shelf for the bar to relaxation on — a serious benefit when squatting heavy hundreds. When it’s time to bench, having a robust higher again will can help you preserve a greater arch and stay secure as you decrease the bar towards your chest.
You Wish to Strengthen Your Posterior Chain
A weak posterior chain can contribute to low again ache and poor posture. Though it’s a little bit of a double-edged sword, the bent-over row can assist you in that space by strengthening key muscle mass like your spinal erectors and hamstrings — each of that are recruited closely to stay in a robust hip-hinge place.
In accordance with a 2021 evaluation on remedy for continual low again ache, 12-16 weeks of posterior chain resistance coaching had a considerably better impact than basic train on ache, degree of incapacity, and muscular power. (1) So, whilst you shouldn’t attempt to max out on the bent-over row when you’re attempting to construct a wholesome posterior chain, you’ll be able to definitely incorporate it right into a program that features basic core workouts like lifeless bugs, hen canines, and planks.
You Wish to Add General Measurement and Power
If rising a thick, dense wall of muscle alongside your again issues most, make the bent-over row the primary carry in your pull day. A 2009 examine evaluating three row variations discovered that this train produced giant activation symmetrically from the higher to decrease again, supporting the concept of the bent-over row as a go-to motion for including dimension and power. (2) General, a compound motion will contain extra muscle engagement than an isolation train just like the chest-supported row.
How one can Do the Chest-Supported Row
To carry out a chest-supported row, you have to a pair of dumbbells and an adjustable weight bench. Altering the incline degree (in addition to your grip) can alter the way you assault your again exercise by stimulating particular muscle mass.
Right here’s a step-by-step information to executing the chest-supported row with the right approach.
- Set your bench to a 45-degree angle. Seize your dumbbells and lie chest-down on the bench with the weights by your sides and your palms dealing with inward.
- Press your toes into the ground, have interaction your glutes, and brace your core to create stress all through your torso.
- Whereas sustaining a impartial backbone and head angle, retract your shoulder blades and pull your elbows towards the ceiling till they type a 90-degree angle.
- Squeeze your upper-back muscle mass on the prime of the motion for one to 2 seconds, then rigorously decrease the weights again to the beginning place. Hold constant stress in your abs to guard your decrease again as you full your set.
[Related: How to Do the Pendlay Row]
How one can Do the Bent-Over Row
The bent-over row requires simply two items of kit: a barbell and weight plates. If potential, use high-quality bumper plates so that you don’t have to fret about noise points. Whereas you too can carry out this train with a pair of dumbbells, this breakdown covers learn how to do the normal barbell bent-over row.
Right here’s a step-by-step information that can assist you to grasp the nuances of this compound motion:
- Stand behind a barbell together with your toes shoulder-width aside.
- Hinge on the hips by holding your again straight and bending your knees barely.
- Seize the bar together with your fingers barely wider than your shoulders utilizing a pronated (palms-down) grip.
- Interact your glutes and core, deadlift the bar off the ground, and lean ahead to type a 45-degree angle.
- Whereas holding a impartial backbone, pull your elbows again till the bar touches your midsection.
- Maintain the contraction for one second earlier than slowly reducing the barbell till your arms are prolonged and the load plates are simply above the bottom.
Advantages of the Chest-Supported Row
The chest-supported row gives loads of intriguing potential for lifters trying to construct a robust, outlined again. Let’s look at a number of key advantages of performing this train.
Added Stability
The largest advantage of the chest-supported row is undoubtedly being able to coach your again with the built-in stability of a bench. That is nice for each rookies and superior lifters who need to attain their power and hypertrophy targets with out having to study a sophisticated approach or fear almost as a lot about core or lower-back limitations.
Takes Benefit of Unilateral Coaching
Versus bilateral workouts just like the barbell bench press or the again squat, the chest-supported row permits you to assault both sides independently. Unilateral coaching is helpful in that it permits you to handle any imbalances and removes the potential of one aspect shouldering extra of the load. Supersetting the chest-supported row with one other unilateral train like single-arm lat pulldowns can take your again exercise to a different degree.
Simpler Restoration
The less-taxing nature of the chest-supported row makes it simpler to get well throughout and after your exercise. This motion doesn’t demand almost the identical depth or general muscle recruitment as a compound train just like the bent-over row.

You must be capable of catch your breath, reset, and be able to go for at the very least a number of units earlier than shifting on to the subsequent train.
Cons of the Chest-Supported Row
Though added stability and simpler restoration stand out as positives, there are some drawbacks to the chest-supported row, together with:
Requires Extra Gear
Sadly, when you don’t have an adjustable weight bench, you received’t be capable of carry out the chest-supported row. Plus, you want a pair of dumbbells (or kettlebells) that present sufficient of a problem. With out the requisite instruments, you’ll have to flip to different again workouts that don’t require a bench (such because the inverted row) or will be carried out with out tools (like Superman holds).
Much less General Muscle Engagement
There’s a tradeoff for extra stability: much less muscle engagement. Since you’re seated together with your chest towards the bench, your core and legs get a little bit of a break. So although the chest-supported row works properly for hitting your lats, rhomboids, traps, and biceps, it falls in need of the bent-over row in what number of muscle teams it recruits.
Can’t Go as Heavy
The awkward physique place of the chest-supported row could make it harder to leap up in weight. Working at the usual 45-degree angle offers you sufficient vary of movement to tug and squeeze, however solely to a sure diploma. Even when you’re an skilled lifter with a stable power base, you’ll shortly understand it may be tough to manage heavier dumbbells and squeeze out clear reps.
Advantages of the Bent-Over Row
Whether or not you’re a bodybuilder, power athlete, or basic gymnasium goer, the bent-over row presents a wealth of potential muscle- and strength-building advantages.
Carryover to Different Pulling Workout routines
Whether or not it’s pull-ups, deadlifts, or the cable seated row, you’ll be able to put your self in a greater place to carry out properly at different pulling workouts through the bent-over row. Constructing power and endurance in your lats and traps will carry over to muscle-building workouts like dumbbell pullovers, lat pulldowns, and face pulls.

Plus, coaching your glutes, hamstrings, and core to deal with a rowing movement from a bent-over place offers you a stronger trunk to deal with no matter deadlift variation you favor.
Compound Motion
In accordance with a 2017 examine on resistance coaching modalities, multi-joint workouts are more practical for enhancing muscle power and maximal oxygen consumption than single-joint ones. (3) That makes one thing just like the barbell bent-over row an incredible bang-for-your-buck selection in your coaching protocol. Not solely does it construct upper-body power, however it additionally stimulates your belly and leg muscle mass from begin to end.
Improved Posture
A sedentary life-style can result in slouched shoulders, weak spinal erectors, and disengaged glutes. The bent-over row can assist counteract that by permitting you to strengthen your posterior chain. As you progress, you shouldn’t be stunned to see an enchancment in your posture and a discount in decrease again points.
[Related: 6 Deadlift Benefits Everyone Should Know About]
Cons of the Bent-Over Row
Is the bent-over row the correct pull-day motion for you? Earlier than you pencil it into your program, listed below are some cons to contemplate.
Damage Threat
Though it may be nice for creating explosive energy and upper-back power, the bent-over row will be harmful if completed incorrectly. Sustaining correct type could be a main problem, as you could cohesively coordinate a number of muscle teams and joint complexes to can help you maintain a loaded hip-hinge place in the course of your set.
Only a slight slippage in type — reminiscent of rounding your decrease again or barely shifting your hips to 1 aspect — can result in a strained muscle, ligament, or extra extreme harm. Whether or not you repeatedly carry out the bent-over row incorrectly otherwise you simply lose focus for one rep, you run the chance of experiencing a setback that would derail your coaching plans.
Grip Power Limitations
If you happen to’re taking the glass-half-empty view, one of many drawbacks to the bent-over row is that your grip power is a limiting issue. In case your forearms and fingers can’t deal with holding, lifting, and reducing a loaded barbell repeatedly, you’ll wrestle to execute the motion successfully or effectively. This can be the case with the chest-supported row when you use heavy dumbbells.

You’ll be able to overcome this downside by constantly engaged on grip power workouts or utilizing lifting straps for assist. Whereas the previous will assist you to get higher at bent-over rows and different lifts that require good grip power, the latter will allow you to work with heavier hundreds by holding your fingers securely mounted to the barbell.
Demanding on Decrease Again and Core
Compound workouts just like the bent-over row basically put your total physique to the check. Whereas there are definitely advantages to recruiting a number of muscle teams in a single motion, your coaching session can shortly go south when you don’t have a well-developed core.
Hinging on the hips and remaining in that near-horizontal place whereas pulling the load vertically locations important stress in your decrease again and belly muscle mass. As soon as fatigue units in, chances are you’ll wrestle to maintain the right type or should put down the barbell solely.
Utilizing Momentum
Whereas the chest-supported row forces you to make use of correct type by holding your chest towards the bench, the freestanding place of the bent-over row opens the door to utilizing momentum to carry the load. If you happen to go too heavy, get fatigued, or lose focus, it’s straightforward to cheat the following reps by swinging or jerking the barbell slightly than sustaining stress and executing strict, managed reps. Not solely will this restrict the effectiveness of the train, however it may additionally result in an harm.
Row Until You Develop
The battle between the chest-supported row vs. the bent-over row doesn’t essentially have a winner or a loser. Each workouts supply distinctive advantages that may help with sculpting the again of your desires. On the similar time, there are notable variations between the 2 rowing variations that may make one or the opposite a extra logical selection based mostly in your particular person targets.
In the end, your greatest wager is to incorporate each the chest-supported and bent-over variations in your exercise plan. That approach you’ll be able to pack critical dimension in your body, develop higher posterior chain and grip power, and reap all of the rewards of rowing — one pull at a time.
FAQs
As a result of every variation brings distinctive advantages, it’s powerful to say one is inherently higher. Nevertheless, when you’re targeted on gaining probably the most dimension and power, the bent-over row is the superior selection. That mentioned, the chest-supported row continues to be helpful for coaching your upper- and mid-back and is mostly simpler to carry out, making it a stable possibility for rookies.
Regardless of their identify variations, each describe the identical train. Whether or not you name it a chest-supported row or an incline row, you have to an adjustable weight bench and a pair of dumbbells to assist your back-building efforts.
The perfect physique place for a bent-over row requires a ahead lean of about 45 levels. Though you’ll be able to go somewhat additional (round 60 levels is my choice), hinging your hips to 90 levels will put extra stress in your posterior chain and should make the train harder to carry out repeatedly.
References
- Tataryn, N., Simas, V., Catterall, T., Furness, J., & L. Keogh, J. W. (2021). Posterior-Chain Resistance Coaching In comparison with Common Train and Strolling Programmes for the Remedy of Continual Low Again Ache within the Common Inhabitants: A Systematic Assessment and Meta-Evaluation. Sports activities Drugs – Open, 7. https://doi.org/10.1186/s40798-021-00306-w
- Fenwick CM, Brown SH, McGill SM. Comparability of various rowing workouts: trunk muscle activation and lumbar backbone movement, load, and stiffness. J Power Cond Res. 2009 Mar;23(2):350-8. doi: 10.1519/JSC.0b013e3181942019. PMID: 19197209.
- Paoli, A., Gentil, P., Moro, T., Marcolin, G., & Bianco, A. (2017). Resistance Coaching with Single vs. Multi-joint Workout routines at Equal Complete Load Quantity: Results on Physique Composition, Cardiorespiratory Health, and Muscle Power. Frontiers in Physiology, 8. https://doi.org/10.3389/fphys.2017.01105
Featured Picture: Jasminko Ibrakovic / Shutterstock